A stuck gate means a closed store. We repair bent slats, broken bottom bars, worn tracks and damaged hoods, and replace springs and motors so the gate runs smoothly again.
For new installs and replacements we supply see-through gates where needed — New York City law requires that new and replaced roll-down gates on most storefronts be at least 70% visible (perforated or grille-style) — and we take care of the welding, tracks and housing.
What we do: rolling gates & storefront security
Repairs
- Bent or broken slats replaced
- Bottom bar and lock repair
- Track and guide welding / replacement
- Spring and axle work
- Motor and switch replacement
- Hood and box repair
New installs
- Perforated and grille-style visible gates
- Motorized roll-down gates
- Interior security grilles and accordion gates
- Window and door gates for storefronts
Why Brooklyn chooses Angir for rolling gates & storefront security
We weld, not just swap parts
Welding tracks, bottom bars and brackets is often faster and cheaper than replacing the whole gate.
Compliance-aware
We install visible gates that meet NYC's storefront gate rules.
Brooklyn-local
Based on 81st St in Dyker Heights, close to the commercial strips on 13th, 18th, 86th, 5th Ave and beyond.
How it works
- 1. Call or text photos
Send a few photos and rough measurements. Most jobs get a price range the same day.
- 2. We measure on site
We laser-measure and template the real opening, stair or wall — Brooklyn buildings are never square.
- 3. Drawing & fixed quote
You approve a simple drawing, material and finish before any steel is cut. No surprises.
- 4. Built in our shop
Cut, fit and welded in our Dyker Heights shop by the same crew that installs it.
- 5. Finished to last
Primer and industrial paint, powder coat or hot-dip galvanizing — chosen for NYC weather.
- 6. Install & walkthrough
Clean, fast install. We check every weld, latch and anchor with you before we leave.
Rolling Gates & Storefront Security near you
We install rolling gates & storefront security all over Brooklyn — especially in:
- Bay Ridge
- Bensonhurst
- Borough Park
- Sunset Park
- Gravesend
- Brighton Beach
- Coney Island
- Flatbush
- Gowanus
- Downtown Brooklyn
- Prospect Heights
- Bushwick
- Williamsburg
- Greenpoint
Also serving Staten Island, Queens and Manhattan.
Rolling Gates & Storefront Security FAQ
Are solid roll-down gates still allowed in NYC?
Local Law 75 of 2009 requires storefront roll-down gates that are newly installed or replaced to be at least 70% see-through, and set a deadline for converting existing solid gates. If you're replacing a solid gate, it will need to be a visible type.
My gate is stuck halfway — can you come today?
Call us. Stuck gates are urgent and we'll prioritize getting your store open or secured.
Can you repair just one bent slat?
Yes — we replace individual slats when the rest of the curtain is good.
Do you offer free estimates?
Send us photos and rough measurements by text or email and we'll usually give you a price range quickly. For custom work we'll visit to measure.
What areas do you serve?
All of Brooklyn, plus Staten Island, Queens and Manhattan. South Brooklyn neighborhoods are closest to our shop.
